Site Information

 Loading... Please wait...

FAQ

Do I need one IPTV box for each TV ?

Posted by Admin on

Yes, in order to service more than one TV, you will need one IPTV box for each TV. 

You have the option to stick with one IPTV box and move it from TV to TV, but this can be inefficient if you are switching TV's quite frequently.

Also, you must activate each box with its own IPTV subscription. 

There is no way of sharing the subscription between multiple IPTV boxes. You also have the option to use an HDMI splitter to hook up one IPTV box to more than one TV, but this will output a mirror image on all TV's that are hooked up.

Internet speed requirements ?

We highly recommend an internet speed of at least 15-25Mbps for a smooth viewing experience. It is also highly recommended that you use an unlimited bandwidth connection with your ISP.Below is an average of what your usage may look like. Remember this is not a guarantee and should only be used as a rough guide [...]

Read More »


MAG250/254: Factory Restore

Please follow the instructions below to factory reset your MAG 254 unit.Instructions: 1) Hold the 3 dots and 3 lines button on the remote (a little north of the volume button). 2) Unplug the power and plug it back in while continuing to hold the button with 3 dots and 3 lines. You will enter into the [...]

Read More »


MAG250/254: Getting a blank screen, display not supported?

Please follow the instructions below to configure the video settings on your MAG254 unit.Instructions: 1) Hold the 3 dots and 3 lines button on the remote (a little north of the volume button). 2) Unplug the power and plug it back in while continuing to hold the button with 3 dots and 3 lines. You will enter [...]

Read More »


How to setup Mag Device (Mag250 or Mag 254)

Instruction how to setup portal on MAG 250/254When the box is being loaded the main portal screen arrears. After that click on “settings”, press remote button “SETUP/SET". Then enter the “System settings".Click on “Servers"Press on “Portals"In the "Portal 1 name" line enter the following "portal 1". In the “Portal 1 URL” enter the [...]

Read More »